6 step cleaning process to get the best out of your stone floor.

1:We inspect your floor before the cleaning process

This is to identify any limitations like stain removal, loose grout, surrounding surfaces sensitive to cleaning solutions and any other areas that need consideration before the cleaning starts.

2: We Protect Your Walls and Furniture

This is to limit over spray on to sensitive areas during the cleaning process.

3: Agitation

This is done by means of a rotary cleaning machine or by hand depending on the areas to be cleaned.

4: Rinse

Slurry (Dirt from the floor and cleaning solution mixed together) with our pressurised cleaning equipment. We sometimes we have to repeat the cleaning process as described above to ensure optimum results.

5: Drying

After the cleaning process has been completed, we will clean up and dry any areas. In cases where the stone or tile has a high porosity, drying can take up to 12- 24 hours.

6: Impregnator Sealer

Then we seal it with  Impregnator sealer that penetrates below the surface of the stone and grout and acts as a repellent for any liquid based spills, and also makes on-going maintenance easier.